Authority: 15 U.S.C. 2101 et seq.

    Source: 40 FR 5496, Feb. 6, 1975, unless otherwise noted.

Sec. 304.1 Terms defined.

    (a) Act means the Hobby Protection Act (approved November 29, 1973;Pub. L. 93-167, 87 Stat. 686, (15 U.S.C. 2101 et seq.)).
    (b) Commerce has the same meanings as such term has under the Federal Trade Commission Act.
    (c) Commission means the Federal Trade Commission.
    (d) Imitation numismatic item means an item which purports to be, but in fact is not, an original numismatic item or which is a reproduction, copy, or counterfeit of an original numismatic item. Such term includes an original numismatic item which has been altered or modified in such a manner that it could reasonably purport to be an original numismatic item other than the one which was altered or modified. The term shall not include any re-issue or re-strike of any original numismatic item by the United States or any foreign government.
    (e) Imitation political item means an item which purports to be, but in fact is not, an original political item, or which is a reproduction, copy or counterfeit of an original item.
    (f) Original numismatic item means anything which has been a part of a coinage or issue which has been used in exchange or has been used to commemorate a person, object, place, or event. Such term includes coins, tokens, paper money, and commemorative medals.
    (g) Original political item means any political button, poster, literature, sticker, or any advertisement produced for use in any political cause.
    (h) Person means any individual, group, association, partnership, or any other business entity.
    (i) Regulations means any or all regulations prescribed by the Federal Trade Commission pursuant to the Act.
    (j) United States means the States, the District of Columbia, and the Commonwealth of Puerto Rico.
    (k) Diameter of a reproduction means the length of the longest possible straight line connecting two points on the perimeter of the reproduction. [40 FR 5496, Feb. 6, 1975, as amended at 53 FR 38942, Oct. 4, 1988]

Sec. 304.2 General requirement.

    Imitation political or numismatic items subject to the Act shall be marked in conformity with the requirements of the Act and the regulations promulgated thereunder. Any violation of these regulations shall constitute a violation of the Act and of the Federal Trade Commission Act.

Sec. 304.3 Applicability.

    Any person engaged in the manufacturing, or importation into the United States for introduction into or distribution in commerce, of imitation political or imitation numismatic items shall be subject to the requirements of the Act and the regulations promulgated thereunder.

Sec. 304.4 Application of other law or regulation.

    The provisions of these regulations are in addition to, and not in substitution for or limitation of, the provisions of any other law or regulation of the United States (including the existing statutes and regulations prohibiting the reproduction of genuine currency) or of the law or regulation of any State.

Sec. 304.5 Marking requirements for imitation political items.

    (a) An imitation political item which is manufactured in the United States, or imported into the United States for introduction into or distribution in commerce, shall be plainly and permanently marked with the calendar year in which such item was manufactured.
    (b) The calendar year shall be marked upon the item legibly, conspicuously and nondeceptively, and in accordance with the further requirements of these regulations.
    (1) The calendar year shall appear in arabic numerals, shall be based upon the Gregorian calendar and shall consist of four digits.
    (2) The calendar year shall be marked on either the obverse or the reverse surface of the item. It shall not be marked on the edge of the item.
    (3) An imitation political item of incusable material shall be incused with the calendar year in sans-serif numerals. Each numeral shall have a vertical dimension of not less than two millimeters (2.0 mm) and a minimum depth of three-tenths of one millimeter (0.3 mm) or one-half (1/2) the thickness of the reproduction, whichever is the lesser. The minimum total horizontal dimension for the four numerals composing the calendar year shall be six millimeters (6.0 mm).
    (4) An imitation political button, poster, literature, sticker, or advertisement composed of nonincusable material shall be imprinted with the calendar year in sans-serif numerals. Each numeral shall have a vertical dimension of not less than two millimeters (2.0 mm). The minimum total horizontal dimension of the four numerals composing the calendar year shall be six millimeters (6.0 mm).

Sec. 304.6 Marking requirements for imitation numismatic items.

    (a) An imitation numismatic item which is manufactured in the United States, or imported into the United States for introduction into or distribution in commerce, shall be plainly and permanently marked "COPY".
    (b) The word "COPY" shall be marked upon the item legibly, conspicuously, and nondeceptively, and in accordance with the further requirements of these regulations.
    (1) The word "COPY" shall appear in capital letters, in the English language.
    (2) The word "COPY" shall be marked on either the obverse or the reverse surface of the item. It shall not be marked on the edge of the item.
    (3) An imitation numismatic item of incusable material shall be incused with the word "COPY" in sans-serif letters having a vertical dimension of not less than two millimeters (2.0 mm) or not less than one-sixth of the diameter of the reproduction, and a minimum depth of three-tenths of one millimeter (0.3 mm) or to one-half (\1/2\) the thickness of the reproduction, whichever is the lesser. The minimum total horizontal dimension of the word "COPY" shall be six millimeters (6.0 mm) or not less than one-half of the diameter of the reproduction.
    (4) An imitation numismatic item composed of nonincusable material shall be imprinted with the word "COPY" in sans-serif letters having a vertical dimension of not less than two millimeters (2.0 mm) or not less than one-sixth of the diameter of the reproduction. The minimum total horizontal dimension of the word "COPY" shall be six millimeters (6.0 mm) or not less than one-half of the diameter of the reproduction.

[40 FR 5496, Feb. 6, 1975, as amended at 53 FR 38942, Oct. 4, 1988]